Assembly and Device Care

• Assemble the Birdfy Cam
• Mount Your Birdfy Cam on a Wall
• Mount Your Birdfy Cam on a Pole

Assemble the Birdfy Cam

1. Attach the antenna to the threaded stud located on the back of the camera by screwing it in place.
2. Put the spacer ring on one end of the mounting arm and screw the arm into the mounting bracket. Attach the nut to the other end of the mounting arm.

Mount Your Birdfy Cam on a Wall

1. Use the drilling template to mark the positions of the holes on the wall. Drill three holes with an electric drill (15/64", 6mm).
2. Drive the provided plastic anchors into the holes. Skip this step if you are mounting on wood.
3. Drive in the screws to fix the mounting bracket on the wall.
4. Attach the mounting arm to the back of the camera by screwing it in.

Mount Your Birdfy Cam on a Pole

1. Loosen the provided hose clips by turning the handle counterclockwise.
2. Wrap the hose clips around the mounting bracket.
3. Align the mounting bracket with the pole.
4. Tighten the hose clips by turning the handles clockwise.
5. Attach the mounting arm to the back of the camera by screwing it in.