Assembly and Device Care

• Install the Camera
• Install Your Birdfy Feeder Metal V Outdoors
• Disassemble and Clean Your Birdfy Feeder Metal V
• Reboot Your Birdfy Feeder Metal V

Install the Camera

1. Mount the camera onto the camera bracket.
2. Attach the camera bracket to the feeder body.
3. Install the side suet feeder.
4. Flip down the perch.

Install Your Birdfy Feeder Metal V Outdoors

1. The Birdfy Feeder Metal V supports only one mounting method: hanging.
2. Press the cord lock and move it towards the farther end of the cord to adjust the cord length on either side to ensure feeder balance.
3. Hang the feeder on a pole or any preferred location.

Disassemble and Clean Your Birdfy Feeder Metal V

1. Remove the camera bracket and side suet feeder from the feeder body.
2. Scrub the feeder body and other components clean with water and a brush.

Reboot Your Birdfy Feeder Metal V

If your camera goes offline or fails to stream, try the following steps:

1. Disconnect the camera from the solar panel, charger or remote camera controller.
2. Press and hold the reboot button for 1 second to shut down the camera completely.
3. Press and hold the power button for 3 seconds to turn on the camera.