Assembly-And-Device-Care

Table of Contents

• Install the Camera
• Assemble, Set Up, and Clean Your Birdfy Nest Cyan/Ebony
• Reboot Your Birdfy Nest Cyan/Ebony

---

title: "Assembly and Device Care" description: "Learn how to assemble and care for your Birdfy Nest Cyan/Ebony."

Install the Camera

1. Insert the screw into the hole at the bottom of the camera and twist it partway in.
2. Connect the solar panel to the camera.
3. Align the bottom of the camera with the camera bracket, then tighten the screw securely to fix the camera in place.

Assemble, Set Up, and Clean Your Birdfy Nest Cyan/Ebony

1. Set up your birdhouse outdoors by mounting it on a pole or wall.
2. To clean the birdhouse, take it down and remove the camera. Clean the rest with water and a brush.

Reboot Your Birdfy Nest Cyan/Ebony

If your camera goes offline or fails to stream, try the following steps:

1. Disconnect the camera from the solar panel or charger.
2. Use the included ejector pin to poke and press the reboot hole for 1 second to shut down the camera completely.
3. Press and hold the power button for 3 seconds to turn on the camera.