Assembly and Device Care

• Assemble the Birdbath
• Outdoor Installation
• Clean the Birdbath
• Reboot Your Birdfy Birdbath Jolly O

Assemble the Birdbath

1. Connect the camera to the solar panel roof.
2. Insert the camera into the camera base.
3. Attach the perch platform to the basin, then insert the perch into the platform.

Outdoor Installation

1. Place the birdbath on a flat surface, or use it with a 14-inch standard birdbath stand (not included).

Clean the Birdbath

1. Remove the camera and solar panel.
2. Clean the basin and other components with a brush and water.

Reboot Your Birdfy Birdbath Jolly O

If your camera goes offline or fails to stream, try the following steps:

1. Disconnect the camera from the solar panel or charger.
2. Press the reboot button for 1 second to shut down the camera completely.
3. Press and hold the power button for 3 seconds to turn on the camera.