Assembly and Device Care

• Mount Your Birdfy Camera Cyan on a Wall
• Mount Your Birdfy Camera Cyan on a Pole
• Reboot Your Birdfy Camera Cyan

Mount Your Birdfy Camera Cyan on a Wall

1. Use the drilling template to mark the positions of the holes on the wall. Drill two holes with an electric drill (15/64", 6mm).
2. Drive the provided plastic anchors into the holes. Skip this step if you are mounting on wood. Next, fasten the mounting bracket on the wall using the screws.
3. Put the washer on one end of the mounting arm, then screw it onto the bracket.
4. Put the nut on the other end of the mounting arm, then screw the camera onto it.

Mount Your Birdfy Camera Cyan on a Pole

1. Loosen the hose clip.
2. Wrap the hose clip around the mounting bracket.
3. Attach the bracket to the pole.
4. Put the washer on one end of the mounting arm, then screw it onto the bracket.
5. Put the nut on the other end of the mounting arm, then screw the camera onto it.

Reboot Your Birdfy Camera Cyan

If your camera goes offline or fails to stream, try the following steps:

1. Disconnect the camera from the solar panel or charger.
2. Use the included ejector pin to poke and press the reboot hole for 1 second to shut down the camera completely.
3. Press and hold the power button for 3 seconds to turn on the camera.