Assembly and Device Care

• Assemble Your Birdfy Feeder Rookie
• Mount Your Birdfy Feeder Rookie on a Wall
• Mount Your Birdfy Feeder Rookie on a Pole
• Disassemble and Clean Your Birdfy Feeder Rookie
• Reboot Your Birdfy Feeder Rookie

Assemble Your Birdfy Feeder Rookie

1. Attach the lid to the seed bin.
2. Align the bottom of the seed bin with the feeding tray, and attach it to the tray.
3. Ensure the seed bin and base are securely fastened with no gaps.
4. Mount the camera onto the camera bracket.

Mount Your Birdfy Feeder Rookie on a Wall

1. Use the provided drill template to mark the locations of the holes, then use an electric drill (15/64", 6mm) to drill two holes.
2. Drive the provided plastic anchors into the holes. Skip this step if you are mounting on wood. Next, fasten the hanging bracket on the wall using the screws.
3. Align the mounting bracket on the back of the bird feeder with the hanging bracket, then hang the feeder securely on the wall.

Mount Your Birdfy Feeder Rookie on a Pole

1. Loosen the hose clip by turning the handle counterclockwise.
2. Slide the hose clip through the slot of the hanging bracket.
3. Align the bracket with the pole and secure it to the pole by tightening the hose clip.
4. Align the mounting bracket located at the back of the bird feeder with the hanging bracket, then securely hang the feeder on the pole.

Disassemble and Clean Your Birdfy Feeder Rookie

1. Remove the camera.
2. Turn the feeder upside down and push the two clips with your thumbs to detach the seed bin from the feeding tray.
3. Clean every component with a brush and water.

Reboot Your Birdfy Feeder Rookie

If your camera goes offline or fails to stream, try the following steps:

1. Disconnect the camera from the solar panel or charger.
2. Press the reboot button for 1 second to shut down the camera completely.
3. Press and hold the power button for 3 seconds to turn on the camera.

---

title: "Assembly and Device Care" description: "Learn how to assemble and care for your Birdfy Feeder Rookie."

Assemble Your Birdfy Feeder Rookie

1. Attach the lid to the seed bin.
2. Align the bottom of the seed bin with the feeding tray, and attach it to the tray.
3. Ensure the seed bin and base are securely fastened with no gaps.
4. Mount the camera onto the camera bracket.

Mount Your Birdfy Feeder Rookie on a Wall

1. Use the provided drill template to mark the locations of the holes, then use an electric drill (15/64", 6mm) to drill two holes.
2. Drive the provided plastic anchors into the holes. Skip this step if you are mounting on wood. Next, fasten the hanging bracket on the wall using the screws.
3. Align the mounting bracket on the back of the bird feeder with the hanging bracket, then hang the feeder securely on the wall.

Mount Your Birdfy Feeder Rookie on a Pole

1. Loosen the hose clip by turning the handle counterclockwise.
2. Slide the hose clip through the slot of the hanging bracket.
3. Align the bracket with the pole and secure it to the pole by tightening the hose clip.
4. Align the mounting bracket located at the back of the bird feeder with the hanging bracket, then securely hang the feeder on the pole.

Disassemble and Clean Your Birdfy Feeder Rookie

1. Remove the camera.
2. Turn the feeder upside down and push the two clips with your thumbs to detach the seed bin from the feeding tray.
3. Clean every component with a brush and water.

Reboot Your Birdfy Feeder Rookie

If your camera goes offline or fails to stream, try the following steps:

1. Disconnect the camera from the solar panel or charger.
2. Press the reboot button for 1 second to shut down the camera completely.
3. Press and hold the power button for 3 seconds to turn on the camera.