Assembly and Device Care

• Fill, Install and Clean Your Birdfy Hum Feeder Ruby
• Filling Nectar and Installation
• Disassemble and Clean Your Birdfy Hum Feeder Ruby
• Reboot Your Birdfy Hum Feeder Ruby

Fill, Install and Clean Your Birdfy Hum Feeder Ruby

Filling Nectar and Installation

1. Remove the camera from the feeder base by twisting it off.
2. Pour the nectar into the base. (For nectar recipe, see Hummingbird Feeder Tips)
3. Securely reattach the camera to the feeder base.
4. Hang the feeder using the provided S hook on a bird feeder stand or any preferred location.

Cleaning

1. Remove the camera by twisting it off.
2. Disassemble the feeder base by pressing down on the snap fit.
3. Clean the base using a brush and water.
4. Use the provided mini brush to clean the interior of the feeding ports.

Reboot Your Birdfy Hum Feeder Ruby

If your camera goes offline or fails to stream, try the following steps:

1. Disconnect the camera from the solar panel or charger.
2. Use the included ejector pin to poke and press the reboot hole for 1 second to shut down the camera completely.
3. Press and hold the power button for 3 seconds to turn on the camera.