Assembly and Device Care

• Install the Camera
• Assemble, Set Up, and Clean Your Birdfy Feeder Cyan/Ebony
• Reboot Your Birdfy Feeder Cyan/Ebony

Install the Camera

1. Connect the camera to the solar panel.
2. Put the camera into the camera compartment and secure it with the magnet.

Assemble, Set Up, and Clean Your Birdfy Feeder Cyan/Ebony

1. Attach the perch to the feeder body.
2. Open the roof to fill the feeder with birdseed.
3. Set up your feeder outdoors by mounting it on a pole or wall.
4. To clean the feeder, take it down and remove the camera. Clean the rest with water and a brush.

Reboot Your Birdfy Feeder Cyan/Ebony

If your camera goes offline or fails to stream, try the following steps:

1. Disconnect the camera from the solar panel or charger.
2. Use the included ejector pin to poke and press the reboot hole for 1 second to shut down the camera completely.
3. Press and hold the power button for 3 seconds to turn on the camera.